Ripple

Build your own Ripple exhaust below. Constructed from hand TIG welded 304 stainless steel for an everlasting anti-rust/corrosion life. Internally ceramic coated for external heat control. *These are passenger friendly.*

Internal Baffle: Depending on your preference in sound and tune, the baffle will reduce overall airflow and will tone down the exhaust a few decibels which you may or may not prefer. Your bike can gain maximum performance with either being straight pipe or baffled, it all depends on your tune. 

O2 Bungs: If you have a 2007-2021+ Sportster, you will need O2 bungs. It's essential for proper air/fuel mixture from your ECM. (Unless you're running o2 eliminators)

Tips : Adds a bit of flare to the ends, whether its a 45 or 90 degree tip, slash cut tips, or teardrop tips. If you choose “none”, you will get straight tips.

Integrated Flange Kit: With our flange kit, you don't have to reuse your OEM flanges. That can be a nuisance because the OEM flanges are snap-ring equipped, requiring special tools and more time to install/remove the exhaust. This adds convenience and less fragile parts to your exhaust system thus, simplifying it all around. 

Details:

•TIG welded

•Mandrel bent 304 Stainless Steel.

•Internally ceramic coated for heat control.

•1.75" inches at flange, then tapers to a full 2".

•Fits 1986+ & up: Sportsters of all trims & models.

•Optional DB Killer internal baffle.

•O2 Sensor bungs added for fuel injected Sportsters.

•Works with rear-sets, mid & forward controls.

•These are made-to-order, turn around time is 2-4 weeks for this specific set.

•Worldwide shipping available.

NOTE:

*If you want an accurate time frame, please email us at support@kineticmotorcycles.com for the current queue.*